Vacuum Measuring Instrument & Component

With the aid of latest technology, we are able to offer Pirani Vacuum Gauge that is available in digital as well analogue type. These gauges are designed with the provision for single & double gauge head and for set point controller with relay out put.

 

Salient Features:

 

• Sensor : Pirani type
• Measuring range : 0.5 mbar to 1x10(-3) mbar
• Compact panel mounting type
• Analogue out put : 0-200 mV
• Sense head connection : KF-10
• Dimension : 99WX98HX236D

Controle panel having electrical hardwires like MCB/MPCB, RYB indicator,3 tier tower lamp, timer ( 0-30 min), hooter, hinged door with locking arrangement, Pump on indicator, pump off indicator, and anti phase reversal arrangement & Digital High Pressure Pirani Gauge.

Mcleod Gauge (Tilting Type): Owing to our years of experience, we are able to offer Mcleod Gauge (Tilting Type) that is an absolute measuring instrument for vacuum. It gives pressure exerted by permanent gases. The gauge works on the principle of Boyels law of gases. Two parallel capillary tube are connected to a common mercury bowl. The rise of mercury column in the capillary gives the vacuum in mm/HG.

 

Ranges:

 

• 2 Torr to 0.001 Torr
• 10 Torr to 0.01 Torr

Water cooled condenser is made to use in the inlet of vacuum pump to capture contaminating vapors/ liquid before it enters in to the vacuum pump, there by preventing pump oil from contamination. It is made in Shell & tube type / Shell & coil type. Materials used for coil/ are SS/MS/copper. Material. Used for shell are SS/MS. Normally available with coil surface area of 0.5 m2, 1 m2, 1.5 m2, 2 m2, 3 m2, 6 m2 etc.

Liquid Nitrogen Trap provides optimum performance for diffusion Pumps. Liquid Nitrogen Trap mounted above the Diffusion Pump reduces back streaming of diffusion oil vapor and this provides clean and better ultimate vacuum in the chamber. Liquid Nitrogen Trap is available in sizes ranging from 65 mm dia. up to 1000 mm dia